Used Roper Whitney rotary machine in great conditon. Power is manual and it comes with a 3/16″ bead setup. In #200054

The JET HVBS-712 Horizontal/Vertical Metalworking Bandsaw has everything any operator needs to tackle even the toughest job. JET increased the width and height of the stand and added new features that exceed expectations. The HVBS-712 is another innovative JET product packed with features you’v... Read More

JET Dual Mitering Horizontal bandsaws unique design head dual miters both left and right for quick angle cuts. FEATURES Heavy duty construction reduces vibration and deflection Built in, self propelled blade brush prevents chip build up in blade guides Blade tension gauge... Read More

Smaller shops and job sites alike benefit from the power and precision of JET when the HVBS-56M is put into action. Its 1/2HP motor offers great versatility and power when cutting in either a horizontal or vertical position. Long list of features and JET backed Two Year Warranty make this saw a m... Read More

Used Promaster Pro28 3X5 radial arm drill press. 2 HP, 3 PH, 230 volt, 1700 RPM. It has six spindle speeds, 88, 154, 282,455,796, and 1500, as well as three feed steps. It can drill up to 1-1/2″, and tap up to 7/8″ in mild steel. It features power downfeed, as well as power to raise a... Read More

The Edwards 40 ton ironworker is the perfect addition to your home, farm, or small fabrication shop. It comes standard with a roundpunch capable of 1″holes in 1/2″ steel, a flat bar shear, and a angle shear. It also has a fourth open tooling station that can be customized to your nee... Read More

Edwards 25 ton dual station power link hydraulic ironworker. Features: Two Workstations 9 Available Attachments 7 Optional Acessories Electric Foot Pedal w/ Integraded Jog Control 20 Foot Quick-Connect Hose REQUIREMENTS! Edwards Ironworker with P... Read More

Grob vertical metal cutting bandsaw. Model NS-18 1HP, 3PH, 220/440 Volt Built in Blade Welder Work Light 24″ x 24″ Table Approximately 1500 pounds

With features unmatched, the JET Dual Mitering , Semi-Automatic, EVS Bandsaw is the perfect solution for cutting structural steel with ease. FEATURES Electronic variable speed from 50-297 SFPM Heavy duty construction reduces vibration and deflection Hydraulic assist desce... Read More

Doall C1216 Horizontal automatic bandsaw. Features: Hydraulic shuttle vise Automatic Operation Hydraulic Downfeed Large 12×16 capacity 5HP, 3PH, 230/460V Main Power 2HP, Hydraulic power motor 1/3HP Coolant Pump Motor 3900lbs

This rugged hydraulic ironworker machine amps up the efficient, feature-loaded design of our SW-50 models with additional capacity for tougher applications. If your shop takes on punching, shearing, and notching jobs on a regular basis, let the SW-623 prove how hardworking a hydraulic ironworker ... Read More

Looking to increase productivity in your shop? This hydraulic ironworker enables 2 operators to work independently at any of the machine’s 5 stations. Plus, the machine’s pure vertical movement minimizes distortion and delivers clean cuts every time. SW-95 universal ironworker runs on ... Read More

Just in is a good used Metalmizer MV2018 Vertical metal cutting bandsaw. Model: MV2018 Cutting Capacity Horizontal 18″ (457mm)* Vertical 20″ (508mm) Vertical at 45° 13 1/4″ (337mm) Wheel Diameter: 18″ (457mm) Overall Dime... Read More

Punching. Shearing. Notching. Sounds like work for 3 machines, doesn’t it? But you can do it all with just one: the SW-503 hydraulic ironworker. This machine was manufactured to multitask at your shop for decades. This 50 ton ironworker runs on 220-volt 3-phase power. 50 tons of v... Read More

The Edwards 40 Ton ironworker features 40 Tons on 115 Volts with Four Available Workstations Standard (3) – Punch, Flat Bar Shear & Angle Shear Open (1) – Factory installed 8” Brake Includes an 8″ Brake with 4-Way Die allowing 1/16″, 1/8″, 3... Read More

Brand new 2×42 belt/disc sander. 3/4HP, 115V, 1PH. The belt operates at 3100 surface feet, and the disc at 3450 rpm. Both will remove material in a hurry! CALL FOR AVAILABILITY!

ID# 30021 Gorton Pantograph Engraver Model# U3 1Phase

DESCRIPTION This new JET GH-1440B Geared Head Bench Lathe is engineered for smooth, quiet operation and user versatility. Positioned on a heavy-duty stand with a newly added built-in footbrake, the GH-1440B includes precision induction hardened ground bed-ways, spindle roller bearings, and ... Read More

The MetalMizer MV2018 metal cutting bandsaw is engineered to save space without compromising production. The MV2018 is uniquely designed to offer the same or greater cutting capacity of other saws in its class with over 30 percent less machine depth. Features That Invite Comparison: ... Read More

# 200055 New old stock of Letter Brakes. Perfect for sign applications or small aluminum flashings. Eight inch working width with adjustable toggle clamp for tension.There are two mounting holes on either side to easily mount is to a workbench or stand.

Used Colchester Mascot 1600 engine lathe in great condition. 10HP, 3PH, 440 volt,with a 18″ swing with 100″ between centers. It will come with a 12-1/2″ 3 jaw chuck, a 16″ four jaw chuck, a steady rest, and several dead/live centers. It also has a coolant pump, and a taper... Read More

Baileigh Tubing Die DS-1250, P-R300. New in good conditon ID #200002

Used Diacro 12 inch hand operated slip rolls in excellent conditon. Model is GA-1548 and its capacity is 20 gauge in soft steel.

Good Used J&L Die Head. Overall Good Condition But the Shank is A little Rough. Otherwise it seems to work well.

Need high production in a limited space? This CNC hydraulic press brake offers programmable controls, top-quality components, and heavy steel construction for an unbeatable price. BP-3305CNC delivers 33 tons of pressure across its 63” table. Runs on 220-volt 3-phase power. Ea... Read More

The Jet ELITE line of saws is a top line designed for the industrial manufacturing industries, where strict tolerances, durability, and safety are a must. FEATURES Adjustable Material Stop Automatic blade shut off switch stops the sawing process Built-in, self-propelled ... Read More

Our PT-105HD has the structural strength to handle 5’ x 10’ sheets. Automatic height detection is ideal for production runs. It arrives nearly fully assembled and comes with software. Runs on 220-volt single-phase power. Control the X, Y, and Z axis movement from the sturdy podiu... Read More

The Edwards 55 Ton Ironworker is a best selling model, featureing four workstations Standard (3) – Punch, Flat Bar Shear & Angle Shear Open (1) – Factory installed 10” Brake Includes a factory-installed 10″ Brake with 4-Way Die allowing 1/16″, 1/8&... Read More

Heavy duty Jet belt/disc sander. 1-1/2HP,1PH,115V. 6×48 belt and 12″ disc. Belt SFPM of 2,850,and disc SFPM of 1,960. Both will move material in a hurry! CALL FOR AVAILABILITY.

Just arrived for sale is a very clean 1340 geared head engine lathe with Acu-rite DRO, manufactured by Vectrax and sold by MSC Specs: Make: Vectrax Model: 8955 Serial:09517350 Type: Geared Head Engine Lathe 3HP, 3PH, 230V 1/3HP Coolant Pump Accu-rit... Read More

The versatile Putsch® SVP 133 Space Save Series can be easily integrated into any workshop, regardless of budget. It is perfect for basic 4’X8′ sheets, while requiring less than 60 square feet of shop space. It is manufactured in Italy, and built with a heavy duty monolithic steel fr... Read More

The Kreg DK1100 FE is an industry standard when it comes to drilling pocket holes. Sold with a electric motor, it will bring productivity and efficiency to any shop. Features: Electric 110 volt motor Convenient swing stops Adjustable fence Quick-change drill bits... Read More

The award winning PM2000B table saw sets a new standard for innovation with an array of patented features and massive body design. The cast iron tables are oversized, and the newly designed arbor lock lever is accessible from above the table top to eliminate the need for dual arbor wrenches. The ... Read More

The Extrema XR-20 has a 14″ to 20″ saw blade capacity, making the ultimate machine for large heavy timber ripping. It features a garanteed 13 foot glue line, 20 HP main motor, optional digital readout, optional black max laser, and heat-treated cast steel chain. Features: 14″ t... Read More

The Model LM116 is Uniquely Designed to quickly and easily produce a lock miter joint for face-frame cabinetry, beams, pillar and column wrapping, box newel posts, solid surface, and more! A and B profiles are cut using a Single Pneumatic Powered Tilting Spindle Features: Increa... Read More

MODEL M312 Mount-A-Glide Easy Controls + Easy Setup + Easy Drilling = Easy Drawer Notching! Our Model M312 is Designed to Produce an EASY, FAST, and ACCURATE drawer box notch with a drilled locating hole simultaneously! This upgraded model includes EASY Foot Cycle Switch!!!... Read More

The Powermatic 201HH 20″ helical head planer is a excellent addition to any production woodshop. This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust p... Read More

If you need a heavy duty industiral planer, look no further than the Powermatic WP2510 Planer. It has a solid steel helical cutterhead with 174 four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is... Read More

Paul saw by Koch Machinery CNC optimizing upcut saw. Program the machine to the length desired, and it will remove the defects,cut to length, and push the parts by the length/offcut to the side to be stacked. Power requirement is three phase, 440 volt 125 PSI This machine ... Read More

The Powermatic PM23150K is based off the Powermatic 2000B series of saws which are similar to the old 66 series units. It offers outstanding features such as oversized cast iron tables, an arbor lock, which eliminates the need for dual wrenches, and a quick release riving knife. Features:... Read More

The Powermatic PM23130K is based off the Powermatic 2000B series of saws which are similar to the old 66 series units. It offers outstanding features such as oversized cast iron tables, an arbor lock, which eliminates the need for dual wrenches, and a quick release riving knife. Features:... Read More

The Jet 6″X 89″ oscillating edge sander is a exceptional machine with the power for large jobs and the ablility to face, edge, and contour sand, all in one unit. Features: Oscillating Belt Graphite Platen Cast Iron Table 4″ Dust Port Tilting ... Read More

Extrema’s Titan XP double sided planer is a feature laden machine designed for industrial applications. Large power comes from the 25 horsepower top motor, and 20 horsepower bottom motor, three phase two thirty or four sixty volt. Carpet style feed system offers a 2 horsepower motor, giving you... Read More

Say hello to JET’s 18″ scroll saw. Combining best-in-class features with innovation and thoughtful design to create the machine you’ve been waiting for. The best part about this saw is the blade change process. Our exclusive upper mechanism clamps and tensions the blade in one s... Read More

Extrema’s Titan Series XP-126T comes in a 26″ width. The XP-126T is available with VECTOR Cutterhead, infeed roller, heavy duty internal drive system, and a PLC controler. Specs: Horsepower: 20 HP Voltage: 230V / 460V Phase(s): 3 PH Width: 26″ Main Horse... Read More

The Extrema upcut saw is available in both left (XC-18L) and right (XC-18R) models. Solid heavy cast iron constructed table top. The newly designed guard assembly is easy to work with, and provides maximum security and visibility. It increases production time over other models, and is designed wi... Read More

The Extrema XS-2P53 is a heavy duty wide belt sander tha is the largest of their industrial line of wide belt sanders. It offers high quality components such as mono-block construction, Telemecaique electrical controls, and Camozzi pneumatic’s. Features: Four Post Table Design... Read More

The Extrema XS-2P43 is a heavy duty wide belt sander that falls in the middle of their industrial line of wide belt sanders. It offers high quality components such as mono-block construction, Telemecaique electrical controls, and Camozzi pneumatic’s. Features: 4 Post Table 75... Read More

Professional grade pocket hole machine at a affordable price. Features include: One pull of the handle starts the motor, clamps your workpiece, and drills perfect pocket holes 110-volt motor 3/8″ hex-shank drill bit (QUIK-BIT) Adjustable fence Two spr... Read More

Designed for continuous, industrial use, the Extrema ET-150 is excellent for demanding applications. Features: Large table Spindle lock and brake Emergency Stop Spindle speeds of 5.5K, 7.5K, and 10K RPM Magnetic Starter Micro adjust left and right... Read More

Extrema offers a full range of wide belt sanders that were designed in the USA especially for the American market. All of our sanders are built using the highest quality components and construction methods such as mono-block construction, electrical controls, and Camozzi pneumatics. Excess... Read More

Shipping: $425.00 The SawStop® Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10″ cabinet saw available. The 5HP, 3ph, 230v configuration with a 36″ Industrial T-... Read More

Shipping: $325.00 The Professional Cabinet Saw is SawStop’s top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance. 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail ... Read More

The 8″ Parallelogram Jointer offers performance and value in a machine loaded with features. The cutterhead is a helical design with 54 four sided knife inserts – these produce a superior finish and much quieter operation than conventional cutterheads, and the inserts do not require adjus... Read More

This 8″ Jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operate... Read More

For sale is a C.O. Porter model 715 24″ wide single surfacing planer. Currently it is set up with a straight knife head, running the Dispozablade brand knives, but a ITCH head is also included. Model: 715 Serial: 6212 15HP, 3PH, 230/460V 24″ Wide straight knif... Read More

The 14BX Series of straightline rip saws lead the way in innovation and value for for medium to large size woodworking facilities. With the bottom blade cutting design, they are among the safest in the industry. With the full heat-treated cast-steel chain and race, they are unmatched in durabilit... Read More

Shipping: $325.00 The Professional Cabinet Saw is SawStop’s top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance. 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail ... Read More

Shipping: $325.00 The Professional Cabinet Saw is SawStop’s top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance. 36-INCH PREMIUM FENCE ASSEMBLY: This aluminum fence assembly provides... Read More

Shipping: $325.00 The Professional Cabinet Saw is SawStop’s top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance. 30-INCH T-GLIDE FENCE ASSEMBLY: The 30-inch T-Glide Fence & Rail ... Read More

The POWERMATIC® 43″ Wide Belt Sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The Sander has centralized controls which allow the user to access all the needed buttons on one simple panel for more convenience. The variable speed fee... Read More

Clean Bridgewood 15″ Open End Sander just in! Model: BWS-15A Serial; 96050726 7.5HP, 3PH, 230/460V 85PSI Requirement 16X48″ Belt Large 8″ Rubber Contact Drum Hold Down Rollers Front & Back Hand Wheel Rack & Pinion Elevat... Read More

EASY Coping Machine C220 Specifications APPLICATION SPECIFICATIONS: EASY Quick-Change Spindles INCLUDED EASY Foot Pedal Cycle Start EASY Pneumatic Hold Down Clamp System 16” Wide Cutting Capacity 5/8” to 1” Material Thickness DRIVE PACKAGE SPECIFIC... Read More

EASY Coping Machine C117 Details APPLICATION SPECIFICATIONS: EASY Quick-Change Spindle INCLUDED EASY Foot Pedal Cycle Start EASY Backer Block Change EASY Pneumatic Hold Down Clamp System 16” Wide Cutting Capacity 5/8” to 1” Material Thickness ... Read More

Shipping: $425.00 The SawStop® Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10″ cabinet saw available. The 7.5HP, 3ph, 230v configuration with a 52″ Industrial ... Read More

Shipping: $325.00 The Professional Cabinet Saw is SawStop’s top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance. 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail ... Read More

Shipping: $75.00 The SawStop Compact Table Saw features SawStop’s patented safety system with the mobility you need to work from anywhere – at home or on the job site. With a 10″ blade and durable construction, you’ll have the p... Read More

Shipping: $200.00 The SawStop(R) Jobsite Saw Pro delivers durability, innovation and precision with a design that’s built for the worksite. The JSS Pro has the following features: SAWSTOP’S PATENTED SAFETY SYSTEM: Stops a spi... Read More

The TALENT T5D 510 is a high-performance nesting CNC router offering speeds and specifications not found in other machines in this price offering. It is a three axis, panel-processing machine tool capable of cutting a wide range of materials including wood products, plastics, and non-ferrous meta... Read More

SCMI R9 Overarm pin router. It was pulled from service and is ready to run. Model: R9 Serial: AA50584 10HP, 3PH, 230V 2 Speed Spindle, 10K and 20K Handwheel Table Elevation Pneumatic Spindle Activation Phenolic guide Fence

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed a ton of functional features into these machines that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding or bench-mounted to fit th... Read More

Shipping: $425.00 The SawStop® Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10″ cabinet saw available. The 7.5HP, 3ph, 230v configuration with a 36″ Industrial ... Read More

Inventory ID# 530176 Used 55Gallon wet dry vac

Inventory ID# 728636 Murphy-Roger MRT-7A Dust Collector 3HP, 3Ph, 203-230/460Volt Baldor Motor 1-Bag  

Very Nice 36″ Bandsaw. Comes With A Powerfeed on the Table. Power is 3 Phase, 220 Volt Horsepower? At just under 9 feet tall and 4 feet wide at the base , this is a robust heavy duty machine.

Inventory ID# 161167 Toolmark Wood Lathe Duplicator Model# 3010

Inventory Id# 30035 CUSTOMIZED Powermatic 225 BEAM Planer 24″x24″ capacity 15 H.P. 230 volt 3 phase belt drive HI-Speed spiral insert cutter head est 6000 RPM Dual 1.5 H.P. feed motors with a/c Inverter control with reversing feed Accurate DRO thickness rea... Read More

The Powermatic 15″ helical head planer is a great addition to any homeowner or industrial woodshop. It has 74 indexable insert cutterhead providing a quieter cut and finer finish compared to straight knives, giving a better result. Features: 74 four-sided inserts 3 V bel... Read More

ID# 100131 Used Donaldson Torit Dust Collector in good condition. Runs and works great! Model 20, 3HP, 1Ph, 230V

Brand new Jet 2HP, 1PH, 230V Dust collector, model 710701K. Specs are: Vortex Cone improves chip separation and collector bag packing efficiency Eliminates premature filter clogging for sustained performance Single-stage design for economical and quiet operation Industrial... Read More

Good used hinge boring machine,manufactured in Austria. It is powered by a 1HP motor, single phase, 220 volt motor. It has pneumatic clamping and A 53″ fence system both left and right from the center of the machine. In ID. 100026

Used Nash chair back sander in overall good condition. Power is 5 HP,3 PH , 230, with a Baldor 1/3 HP feed drive motor. Height range 0-8″, and thickness range 0-3.5″. It has a 9″ contact drum and takes a belt size of 8″ X 110″.

Inventory Id# 100026 For Sale is a used Grass Ecopress-P Pneumatic Hinge boring machine in excellent  condition. It is is powered by a 2HP, 3PH, 220 volt motor. It has 5 spindles, 53″ rails left and right, and has pneumatic clamps on left and right sides of the head. Manufactu... Read More

Very clean Delta Invicta RC-63D 24″ Single Head Planer MFG. 11/1997, Model 22610, Serial No. 1302 24″ Width 10 HP, 230 volt, 3 phase Solid serrated in-feed roller, urethane out-feed roller Two feed speeds Adjustable bed rollers Power table ... Read More

Inventory ID# 530160 14″ Rotary Air Lock 2 HP, 230/460 Volt, 3Phase Gear Motor Drive

Product Details If you’re looking for the ultimate machine to build face-fames, this is it. The DK3100 contains three spindles that allow you to drill two pocket holes across rails of varying widths in just one machine cycle. Best of all, the DK3100 can also be quickly changed to drill a ... Read More

Shipping: $425.00 The SawStop® Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10″ cabinet saw available. The 5HP, 3ph, 230v configuration with a 52″ Industrial T-... Read More

Engineered for continuous industrial applications, the Extrema ET-160 Shaper is a excellent machine for demanding applications. Features: 10 HP 3 spindle speeds: 5.5, 7.5 and 10K RPM Reversible Magnetic starter Precision fence assembly Table inserts... Read More

We have a clean Powermatic 221 20″ Industrial planer for sale. It features a segmented knife cutterhead, powered by a 7.5 horsepower Baldorthree phase motor, 230 Volt. 8″ x 20″ Capacity Mimimum of 1/8″ 4-1/8″ Cutting Circle 3600 SFM Seg... Read More

Brand new 3″x4″ pneumatic sander with adhesive backed pad. 10,000 OPM, with adjustable speed. Great for small applications and tighter spaces.

Brand new Jet 14″ bandsaw. 1-3/4HP, 1PH, 115/230V. Heavy duty steel frame, large table with upgraded fence system, 13-1/2″ of resaw capacity with 13″ of height, and dual 4″ dust ports.Call for availability!

This is a downdraft table acsessory for Jet Proshop and Xacta Table saws. It is slightly used but in excellent condition.

Brand new variable speed sander. It has the capabilities for contour and straight finishing aplications. 1HP single phase motor, 115,or 230 volt, with a varible frequency drive. The brush head and pneumatic drum are sold seperately and available in different sizes and grits.

Up for sale is a clean, used 1 Owner 25″ Wide Belt Sander, which is perfect for the small wood shop, or homeowner who needs performance, small footprint, All in single phase! Specs Make: Sun Hill Model: SDS-25 Power: 5HP, 1PH, 230V Belt: 25×48 Air ... Read More

Used Grass Imperial 1241 hinge boring machine. It is electric and pneumatic operation with a Dayton 1 HP 3 PH motor, 220 or 440 volt, and pneumatic cycling and hold downs. It has 5 spindles, 42 mm on centers, It comes with 3 foot rails,left and right, as well as several boring bits and all the ... Read More

Used Dustek frame mounted dust collecting unit. Model M150JR,one and one-half horsepower, single phase, 115/230 volt. Cloth top bags, with a 55 gal drum on the bottom. Good Condition. Two available.

Shipping: $325.00 The Professional Cabinet Saw is SawStop’s top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance. 30-INCH PREMIUM FENCE ASSEMBLY: This aluminum fence assembly provides... Read More

The Extrema Pro series 16″ jointer is designed for continuous use in a production environment while giving you a clean straight finish. Standard features include manual brake with shutoff,parallelogram bed design, heat treated infeed and outfeed tables, positive stops at 45 and 90 de... Read More

NEW ITEM! Powermatic PM2014 variable speed lathe with stand. Motor only requires a 115 volt single phase input while providing a consistent torque with 1 horse power, 230 volt, and 3 phase output using an inverter.Most range of height in the Powermatic family. Adjust centerline to floor fro... Read More

Used Max HD-237 24″ heavy duty industrial disc sander. Machine was just pulled from service, and is in excellent running condition. It was only replaced because the company bought a smaller new machine because they don’t need the size. Make: Max Model; HD-237 3HP, 3... Read More

The JBOS-5 Benchtop Spindle Sander has a 1/2HP motor, and a large 14-1/2” tilting table. A heavy-duty worm gear system provides one-inch oscillating action, which prolongs sleeve life and helps prevent burnishing of the workpiece. Four inserts are provided, and 5 spindles with sanding sleeves.... Read More

Item No. Distance Between Centers Overall Length Swing Over Bed 2436 36″ 60″ 24″ 2416 16″ 40″ 24″ 2036 36″ 60″ 20″ 2016 16″ 40″ 20″ AC Electronic Variable Drive 0 – 3000 RPM with F... Read More

The ET-120 has a huge working area and huge quill coupled along with 5 HP 3 phase motor. Optional sliding fence attachment also available. 2 Spindle Speeds: 7,500 and 10,000 RPM Interchangeable Spindles Reversable Magnetic Starter Micro adjustable fence Table i... Read More

The new JET JMS-12 dual bevel sliding compound miter saw is a proffesional saw that will efficiently cut miters,bevels,straights, and compounds, with prcision and accuracy, making it a excellent shop saw or jobsite saw. FEATURES: Dual bevel capability with up front controls... Read More

One of the largest oscillating edge sanders on the market, the ES-9138 lets you create smooth, well-fitted cabinets, doors, and flooring. The steel base and cast iron table ensure stability. Accepts 9” x 138.5” belts, a common size. Long, wide belt will last longer and run cooler... Read More

Brand new Jet 10″ ProShop table saw. 1-3/4 HP, 1PH, 115V . Comes with 52″ fence system and steel wing,as well as a quick release riving knife. 5/8″ arbor with a speed of 4,000 RPM, and a max cutting thickness of 3-1/8″. CALL FOR AVAILABILITY!

NEW ITEM! Shop Fox W1833 pocket hole machine. 1/2 horsepower, single phase, 120 volt, with a spindle speed of 2500 RPM. It is capable of drilling holes in material from 1/2″ to 1-1/2″, at a 15 degree angle. It features a auto stop/start motor actuation by the pull/release of the handl... Read More

Brand new Jet 16-1/2″ drill press. 3/4HP,1PH, 115/230V. 16 speeds, high quality ball bearing spindle, and depth stop. Call for availability!

New Item! Powermatic  2014 variable speed bench lathe. Motor only requires a 115 volt single phase input while providing a consistent torque with 1 horse power, 230 volt, and 3 phase output using an inverter.Magnetic control box displays both digital speed and indexing and can be relocated for c... Read More

Brand new Jet dust collector. 2HP, 1PH, 230V, with 2 mircron canister kit. It features vortex cone technology which aides in fallout of chips into the collector bag instead of clogging the filter or canister while sucking at 1200 CFM. CALL FOR AVAILABILITY!

Brand new Jet cyclone style dust collector. 3HP, 1PH, 230V. Heavy material gets collected in a steel drum while fine particles get filtered down to one micron in pleated material. There’s plenty of suction with a max CFM of 1,240 at 8 inches of static pressure. CALL FOR AVAILABILIY!

Brand new Powermatic 10″ tablesaw. 5HP, 3PH, 230/460V. 50″ rip with Accu-cut fence. Heavy duty trunnion and gears for easy raising and tilting of the blade, with a poly V belt drive system for a quieter and more effecient power transfer to the saw arbor. CALL FOR AVAILABILITY!

Brand new Powermatic dust collector. 3HP, 1PH, 230V. It features Turbo Cone Tech. which improves chip separation to prevent clogging of the filter and increases the packing capacity of the bag. It also will collect 98% of two micron particles! CALL FOR AVAILABILITY!

Brand new Jet 13″ benchtop planer. Helical style head with 26 quick-change inserts for smoother and quieter cut. It is run by a 2HP,15 amp motor to turn the cutterhead at 10,000 RPM. Maximum capacity is 6″ of height and 13″of width. Call for Availabliliy!!

Extrema offers a full range of wide belt sanders that were designed in the USA especially for the American market. All of our sanders are built using the highest quality components and construction methods such as mono-block construction, electrical controls, and Camozzi pneumatics. Exceess... Read More

Heavy Duty ice scrapers for sale, custom made in our machine shop,in Blue Ball Pennsylvania. All steel construction, with a 8″xl10″ scraper blade, and a48″ handle,giving you 8 pounds of ice breaking power. Wholesale pricing 5+. Link to online purchasing: http://www.... Read More

Used Power Twin hydraulic ram and pump set in good condition. Included are 2″ stroke 17-1/2 ton ram, compact spring return unit with through hole for adjusting screws,pullers, etc. and a guage. Id# 200013C

Utility Pro Hi-vis softshell jacket. Class 3 ANSI certified. Different sizes available.

Hi-vis safety vest, UHV312 , class 3 ANSI certified . L/XL sizes available.

Utility Pro hi-vis pants. Waterproof, class 3, ANSI certified. Different sizes available.

Utility Pro Hi-vis UHV821 3 in 1 bomber jacket. Removable liner, class 3 ANSI certified. Different sizes available.

Brand new Wilton sledge hammer. Unbreakable handle technology with a lifetime warrenty! In Stock! We are an authorized dealer and can help with any warranty or repair needs. Id# 20412

Air Mate 2HP, 1PH, 115 volt, dual tank four gallon portable air compressor. Max PSI is 125: Used but in good condition.

Jenny 80 gallon vertical tank industrial air compressor, model W5B-80. Specs: 5 HP 1 PH, 230V UL Electric Motor Two Stage W Pump Features: Heavy-duty single or two stage cast iron compressor pump – Made in Somerset, PA USA Splash lubricated Belt... Read More

This is a used motor in good condition. Specs. are: 1-1/2 HP, 3 phase, 230 volt, 1725 RPM, and 7/8″ shaft.

Teco-Westinghouse 30HP, 3Ph, 230/460 V motor. 1800 rpm, 70amp, Frame 286T. Only ran once! Like new.

Metabo 5″ angle grinder. Runs at 11000 RPM, has a automatic safety clutch, quick wheel change, paddle switch, and two second brake. CALL FOR AVAILABILITY!

Metabo 5″ performance grinder is a powerful and robust angle grinder with speed regulation and ergonomic soft handle for fatigue-free working, especially over your head Features: Powerful motor with good overload capacity Vario-Tacho-Constamatic (VTC)-Full Wave Electronics... Read More

The Power Port LED-750 work light is a powerful and lightweight addition to any garage, toolbox, or work vehicle, providing up to 750 lumens to illuminate any dark spaces. It features a impact resistant design, polycarbonate lens, aluminum housing, and non-slip rubberized grip. It h... Read More

The Power Port LED-1000 work light is a powerful and lightweight addition to any garage, toolbox, or work vehicle, providing up to 1000 lumens to illuminate any dark spaces. It features a impact resistant design, polycarbonate lens, aluminum housing, and non-slip rubberized grip. It ... Read More

Powerful 15A / 3-1/4hp electronically-controlled motor with variable speed, soft start and safety switch. Features a removable fixed base with a depth adjustment range of 3-1/8″ and a max cutting diameter of 3″. Effective dust extr... Read More