Baileigh’s largest NC hydraulic press brake weighs 8,800 lbs. with a rigid steel frame. The encoder-controlled stroke and back gauge system offers 2 DROs and takes just 5 minutes to learn.

Delivers up to 90 tons of pressure.

Bends sheet metal up to 78” wide.

• 10 hp main motor runs on 220-volt 3-phase power
• Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.

• 2 encoder-controlled hydraulic cylinders move the top beam.
• Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.

• Item Number	BP-9078NC
  Back Gauge Length	17144
  Return Speed	2.36″ / sec.
  Motor	10 hp
  Oil Capacity	45 gal
  Included Accesories	Included Accesories
  Throat Depth	7.87″
  Stroke Distance	5.9″
  Table Width	6.29″
  Approach Speed	3.14″ / sec.
  Back Gauge Motor	1/2 hp
  Bed Length	17145
  Bending Speed	.236″ / sec
  Maximum Capacity	90 tons
  Distance Between Housings	61″
  Distance From Table To Ram	11.81″
  Power	220V / 3-phase
  Shipping Weight	8800lbs
  Shipping Dimensions (Inches)	103x85x100